background image

22

 

 

CHILD PROOF mode

This model is equipped with CHILD PROOF mode. After this mode is set to ON, the lid can be locked so that children should 
not fall into washing-spining tub during washing or drying. 

If you find the accident such as children’s falling into the 

wash tub, please take necessary safety action urgently.

If there are small children who require attention, set this mode ON.

WARNING:

 Pay attention to small children. Do not leave the lid open. Do not leave the washer filled with water. Never allow 

children to look into the basket or play around the washer. Do not place the stand or box etc. near the washer.

HOW TO USE CHILD PROOF MODE

CHILD PROOF MODE (if you have small children)

Press the 

 button, then the washing machine begins operating, follow the instruction below:

Hold down the 

 button, press the 

 button once again.

 A buzzer will sound and the CHILD PROOF mode indicator will be activated.

Once the CHILD PROOF mode is set, it is stored in memory.

Canceling the CHILD PROOF mode

Hold down the 

 button, press the 

 button once again.

 A buzzer will sound and the CHILD PROOF mode indicator will be canceled.

Once the CHILD PROOF mode can be canceled even during the operation.

L

 Cannot add detergent while child proof mode. The lid lock is activated.

L

 If accident occur when strongly pull up lid when lid lock in child proof mode operate. The buzzer will be sound and operation 

will stop. Subsequently if that state persists about 5 seconds, it will be detected as an alarm and water will be drained.

 

   

   

 

ON

OFF

LID LOCK RELEASE

L

L

(When the power is turned off or shut down during operation, the lid will be automatically locked.)

WARNING: Do not open the lid in this state/the

lights up, doing so may damage the lid.

Do not force to open the lid, if it is locked. Please release it as.

During the machine operation.

Press the

button to release the lid.

During the machine shut down.

Press the

button to release the lid.

Remark: Please wait until the lights at indicator  will off before open the lid.

Содержание AW-DC1000CM





































Отзывы: