Toshiba AW-DC1000CM, Руководство пользователя

Страница: 29 / 36

29
INSTALLATION
Allow 5 cm
When adjusting the legs, supports the top of the machine. Do not support the machine bottom.
1 Adjust the legs so that the machine does not move.
Note: After adjustment, lock the nuts
of the legs by rotating them in the
direction of the arrow. Make sure so
that the bottom of the main body front
does not reach the floor. If the bottom is
in touch with the floor, then it will be the
cause of shaking and abnormal noise.
2 Check the position of the air bubble in the floor level
indicator.
•
If the bubble is not positioned inside the circle, adjust the
height by rotating the leg caps.
Note: Check the floor level
indicator directly from above.
Standard point
Bubble
Tighten nuts of
adjustable legs
and lock them.
(Ex.) The washing machine is
tilted towards the right.
Unlock Lock
Up Down
Height adjusting leg
3 Depending on locations of the bubble in the horizontal
level indicator, place caps and lock legs (Make sure to
fix adjustable legs.)
•
Mount the leg caps on the
right-hand legs. Rotate
the height adjust legs to
perform height adjustment.
4 Hold down the diagonal line of the washing machine
and make sure that no ratting occurs.
•
Despite the fact that the bubble is inside the circle, the ratting
exists. Then shaking motion
becomes larger or some
abnormal noise comes out.
Make sure to readjust in
case the washing machine
rattles.
•
Be sure to ground your washing machine when installing. When connecting or disconnecting the ground wire, be sure to
first remove the power plug from the AC socket.
•
In case of the machine with two conductor cord connect the ground wire to a proper ground before plugging the power cord into the
socket.
•
In case of 3-core cord the ground pin in the plug should be connected to the proper point of the socket.
Do not connect the ground wire in any of the following places under any circumstances:
•
Do not connect the ground to gas piping. There is a danger of fire or explosion.
•
Do not connect the ground to telephone lines or lightning rods. There are dangerous during thunder or lightning storms.
Also, as underground water pipes are often made of plastic, don’t place grounding rods near them.
Install your washing machine in a level, stable place.
•
It is dangerous to place the
washing machine in an
unstable location since it
may move during vibration.
•
It will increase the sound produced by the machine when
it vibrates during use.
When you move washing machine, hold the handles on
the sides.
There are moving parts, electrical parts and steel plates
which may cause electrical shock or injury.
•
Never touch on the cabinet
bottom by hands.
Never life at the cabinet
bottom by hands.
When the machine is covered.
Do not use the cover made of chloric vinyl. Sometimes it
damages resinous parts and painted surface. When you
use the cover made of chloric vinyl, put the cloth between
the machine and the cover.
Avoid place where the machine is exposed to direct
sunlight.
•
Plastic parts may become
deformed or discolored.
Avoid places where the machine may become frozen during
cold weather.
Allow a space of at least 5 cm from the sides and rear of the
machine to the nearest vertical object.
•
When placed too near to
walls or other objects, the
vibration of the machine
during operation may
cause them to shake.
Leveling the washing machine
Choosing an installation location
Installing the ground wire