10
HM116 (E/F) Web 213:276
Chapter 1: Introduction
11
9
10
8
7
7
HDMI
™
1 IN
and
HDMI
™
2 IN
— Two High-Definition
Multimedia Interface inputs receive digital audio and
uncompressed digital video from an HDMI device or
uncompressed digital video from a DVI device.
Also see item 2.
Note:
HDMI 1 (and 2) IN share analog audio inputs with
ColorStream HD-1 (and HD-2) IN. To specify the use of the
audio inputs for a connected HDMI (or DVI) device, see
“Setting the HDMI audio mode” on page 29.
8
G-LINK
™
— For use with the enclosed IR blaster/
G-LINK
™
cable to enable the TV Guide On Screen
™
recording features (
-
Installation Guide
).
9
Digital Audio OUT
— Optical audio output in Dolby*
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input.
10
RJ-45 (Ethernet) (THINC
™
system**)
— For
connecting the TV to your home network. See boxed note
below.
11
CableCARD
™
slot
— For use with a digital security
card and digital cable TV service (provided by your local
cable operator) to view encrypted digital programming
(
-
page 29).
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
CableCARD is a trademark of Cable Television Laboratories, Inc.
*
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks of Dolby
Laboratories.
**THINC
™
system
(Toshiba Home Interactive Network Connection)
The RJ-45 (Ethernet) port allows your Toshiba TV to
connect to your home network. You can use this
revolutionary home entertainment networking system to
access MP3 audio files and JPEG picture files that are
stored as shared files on a networked PC and play/display
them on your TV.
You also can play your shared MP3 audio files through a
connected audio system.
See Chapter 7 for details. Also see the
Installation Guide.
HM116_EN.book Page 10 Monday, June 19, 2006 7:30 PM