60
Initial Setup and Menu
Bar Wizard and select this channel each time the TV is turned on.
❖
If time information is not being received correctly, records of
previously watched channels may not be stored properly.
❖
The records of previously watched channels may be erased.
❖
To set a channel from an external input, first set the IR Blaster settings.
Register channels from devices connected through IR Blaster, and
DTV or cable TV channels.
1
Select
Next
and press the
OK
button.
2
Read the information on screen, and select
Agree
after
confirming the contents. Then select
Next
and press the
OK
button.
A Favorite Channels registration prompt screen appears.
3
To set Favorite Channels, select
Yes
and press the
OK
button.
4
Register a channel.
❖
Up to 10 channels can be set for Antenna/Cable and
external input devices.
To register an Antenna/Cable channel:
1
Press the
p
/
q
(arrow) buttons to select a channel.
2
Press the
OK
button and the channel marked with
3
will
be set in Favorite Channels.
To register a channel received through an external input
device:
1
Press the
t
/
u
(arrow) buttons to change the input.
2
Press the
YELLOW
button.
3
Use the number buttons (0-9) to enter the Channel
number to register, then press the
OK
button.
4
When the focus has moved to the
Channel Name
, press
the
OK
button.
5
When the software keyboard appears, enter the Channel
Name.
For how to use the software keyboard, refer to
software keyboard” on page 125
.
To register another channel for the same external input
device, press the
q
(arrow) button to move the focus
to an empty space and repeat the procedure from step
2
onwards.
Performing the initial setup
