Picture and Sound Controls
113
Selecting the analog audio output format
Set the type of analog audio that is output from the
ANALOG AUDIO
OUT
terminal.
1
Press the
MENU
button.
2
Select
Sound
>
Analog Audio Output
and press the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
Fixed
or
Variable
.
Fixed:
Audio is output at a constant volume level.
Variable:
The volume level can be adjusted on the TV.
4
Press the
EXIT
button.
Digital Audio Selection
You can switch to DTV broadcast digital audio.
1
Press the
MENU
button.
2
Select
Sound
>
Digital Audio Selection
and press the
OK
button.
3
Press the
t
/
u
(arrow) buttons to select your preferred language.
4
Press the
EXIT
button.
NOTE
This operation cannot be performed when receiving ATV broadcasts or
watching externally input video.
Using the Dolby
®
Digital Dynamic Range Control feature
You can further compress Dolby
®
Digital and Dolby
®
Digital Plus
dynamic range so you can switch from digital to analog broadcasts at the
same dynamic range.
1
Press the
MENU
button.
2
Select
Sound
>
Dynamic Range Control
and press the
OK
button.
3
Press the
p
/
q
(arrow) buttons to select
On
.
NOTE
This feature is available when Dolby
®
Digital or Dolby
®
Digital Plus is input
to the TV in the following situations:
❖
When tuned to a digital RF channel
❖
When an HDMI
®
input is used
❖
When network devices are used
This feature will also affect
Digital Audio Output
when the optical audio
output format is set to
PCM
.
Adjusting the audio
