background image

 

Troubleshooting 

163

ensure that the Input Lock is set to Off, see 

“Locking video inputs” on 

page 79

.

Poor display color or no color.

Check for proper hookup connections between your devices.

The station may be having broadcast difficulties. Try another channel.

Adjust the Tint and/or Color, see 

“ColorMaster™” on page 103

.

Poor composite picture.

If the TV is connected to an external A/V device (e.g. DVD player, video 

game system, set-top box, etc.) try using a ColorStream or HDMI

®

 video 

connection instead.

Picture and sound are out of sync.

As with all products that contain a digital display, this may occur in 

rare instances, when viewing certain content (e.g. television broadcasts, 

video games, DVDs). The cause may include, without limitation, video 

processing within the TV, video processing in an attached gaming system, 

and video processing or different compression rates used by broadcasters 

in their programming.
Try the following:

 

If the TV is connected to an A/V receiver that has a programmable 

audio delay feature, use this feature to help synchronize the sound 

to the picture.

 

If the problem occurs only on certain TV channels, inform your 

local broadcast, cable, or satellite provider.

 

Turn off and unplug the TV from the AC wall outlet for a few 

seconds and plug it back in.

 

Picture problems

Содержание 55L7400U

























































































































































































Отзывы: