15
•
If the aspect ratio of the selected format is different from the
one of the TV transmission or video programme, it can cause
a difference in vision.
•
When using PC connected via HDMI terminal, the moving
image quality may be deteriorated.
HDMI 2.0 Format
Match the connected device output format. You can select
Standard format and Enhanced format in HDMI mode.
Enhanced format for devices of 4K@50/60Hz (YCbCr4:4:4,
YCbCr4:2:2).
Apply Picture Settings
Adjust current picture mode to apply to current source or all
sources.
Restore Current Mode To Default
Reset current picture settings to factory mode.
Sound
System sounds
Open the default system sound.
Sound Mode
Select a preset sound mode to suit the type of content you are
listening to.
Speakers
Select the speakers which you want to use.
Optimizes overall sound quality by increasing bass, making
dialog clear and natural, and widening the sound field.
Wall Mount Setup
Automatically optimize the sound based on the position of the
TV.
Sound Channel
Choose to output dual, mono L, mono R.
NOTE
•
This function may not be available in your country/region.
Advanced Settings
Tune the audio settings and quality of the TV.
•
Balance:
Adjust the left and right speaker strength to optimize
audio for a specific location.
•
Digital Audio Out:
Select the digital audio output format that
best suits the audio device type.
NOTE:
When connected the TV with optical, Dolby Digital
Plus is not suggested.
•
Digital Audio Delay:
Adjust the digital audio output delay
time to sync sound from an external speaker with the images
on the TV.
•
Lip Sync:
Synchronize the displayed image with the audio
output.
•
Equalizer:
Boost the volume at different frequencies.
Audio Type
•
Audio Type:
Select the audio type of programmes.
•
Voiceover volume:
Independently adjust the volume of
voiceover.
Restore Current Mode To Default
Reset current audio settings to factory mode.
Channels
Tuner Mode
Select if you receive TV channels over the air (antenna) or
through a cable set top box as the input will be used during a
channel scan.
Auto Scan
Automatically scan for channels to view programmes from your
TV source.
Channel Edit
Manually edit the channel list order to your preference.
Advanced Settings
Adjust advanced settings for Channel.
•
DTV Manual Scan:
Search and store the channels under
DTV mode.
•
ATV Manual Scan:
Search and store the channels under ATV
mode.
•
ATV Fine Tuning:
Fine tuning current channel to improve the
programme picture.
•
Channel List Auto-Update:
Allow your TV auto-update the
channel list from the content provider.
•
Audio Language:
Select a desired language from the list in
DTV mode.
NOTE:
This function may not be available in your country/
region.
•
PVR Time-Shift Settings:
Initialize the external USB disk
to support PVR and Time-Shift. (Since the function record
temporary the program onto a hard disk only.)
Parental Controls
The Parental Controls setting allows you to block content that is not
appropriate for children to watch.
Turning Parental Controls On
1 Go to Locks.
2 Press the
[OK
] button on your remote, a Create PIN window
displays. Using the D-pad on your remote, create the password.
3 Press the
[OK]
button to turn the locks On.
You will see the other Parental Controls settings change from a
greyed out state to highlighted. When this occurs, begin adding
other settings to the Block Time, Channel Block, Program Block,
Input Block, Change PIN or Reset features.
Block Time
Block certain channels and programmes during certain periods
of time.
Menu
Содержание 50U7950 Series
Страница 1: ...Bar code ...