Toshiba 50U7950 Series, Руководство пользователя, Страница: 13 / 29

11
Remote Control
Installing Batteries in the Remote Control
Press the release button on the back of the remote control to remove the
battery compartment cover.
1. Slide the back cover to open the battery compartment of the
remote control.
2. Insert two AAA size batteries. Make sure to match the ( + ) and ( -
) ends of the batteries with the ( + ) and ( - ) ends indicated in the
battery compartment
.
3. Close the battery compartment cover.
NOTES
• Product image is only for reference, actual product may vary in
appearance.
Handling the Batteries
• Incorrect use of batteries may cause corrosion or battery leakage,
which could cause fire, personal injury or damage to property.
• Only use the battery type indicated in this manual.
• Do not mix old and new batteries or different types of batteries.
• Do not dispose of used batteries as domestic waste. Dispose of
them in accordance with local regulations.
• Battery chemicals can cause a rash. If the batteries leak, clean
the battery compartment with a cloth. If chemicals touch your skin,
wash immediately.
• If you do not intend to use the remote control for a long time,
remove the batteries.
• Remove depleted batteries immediately to prevent battery acid
from leaking into the battery compartment.
Pairing the Remote Control
1. Pair the remote to the TV after you power it on. Keep the remote
control within 10 feet from the TV. Press and hold the
[ ]
button at least 3 seconds to start pairing.
2. If the remote paired successfully then a confirmation will display
on the screen. If it did not pair successfully then an ‘unsuccessful’
message will display. Repeat step 1.
NOTES
• If an unknown error occurred with the remote then it could have
been caused by interference. Try to remove what’s causing the
interference and pair it again.
1
Gently push and slide
2
Insert the batteries
3
Gently push and slide
• If an unknown error occurred in the remote control while the
battery power is normal, you can take out the batteries and
press any key for 1~2 seconds, then the remote control can work
normally.
• The remote cannot be paired to the TV while the TV is in standby
mode.
Remote Control Operation Range
For 50”/55”/65”
For 75”