Colour : AUTO
1
I
A
22 + 2 BBC1
Manual tuning
17
Q
uestions
and
A
nswers
Below are the answers to some of the most common queries.
A
Check the mains switch is on and check all
connections.
Check the TV is not in standby mode.
For quick reference
to topics, see the
INDEX at the back
of this manual.
Why is there no sound or picture?
Q
A
This is sometimes due to condensation if the room
temperature rises rapidly or the TV is moved from
a cold room to a warm room. Leave the set turned on for
a while this should improve the images.
Why are there distorted images/faded colours?
Q
A
On this television the red, green and blue images
are projected separately onto the screen. They
converge to form full colour and when they converge
correctly you will see a clear picture. It is especially
apparent when viewing cartoons.
The green is fixed and therefore not adjustable. The red
and blue are factory set and should need little or no
adjustment. However, convergence may drift over time or
if the TV is moved.
Let the TV warm up for at least 30 minutes before
realigning the colours…
Why are there coloured outlines in the picture?
Q
A
Check the Scart lead connection.
Why is there a good video picture but no sound?
Q
A
Make sure the VCR or DVD player is connected to
the TV as shown on page 6, then select the correct
input by pressing
B
.
Why doesn’t the video/DVD being played show
on screen?
Q
A
When using an
external
source, for instance, a
poor quality video tape, if there is little or no
colour, improvements may sometimes be achieved. The
colour is factory set to
AUTO
to automatically display the
best colour system.
To check that you have the best colour:
There IS a picture, but why is there little or no
colour?
Q
Select
Colour
from the
Manual tuning
menu
.
With
S
or
R
choose between
AUTO, PAL,
SECAM, NTSC 4. 43
or
3. 58
.
1
2
1
2
3
7
8
9
4
6
f
ff
f
EXT2 input
S-VIDEO
EXT3 input
S-VIDEO
EXT2 output
MONITOR
Picture position
Panel lock
OFF
Blue screen
ON
Convergence
Feature menu
EXIT
: To exit
red
blue
EXIT : To exit
From the
Feature menu
select
Convergence
.
To adjust the colours, press the RED or BLUE button
to select RED or BLUE and then
S
or
R
and
P
or
Q
to adjust until the white cross has no 'shadow'.
Press
EXIT
to go back to the TV screen and check
the picture. If more adjustment is needed, simply
repeat
steps 1
and
2
.
If the edges of the screen are not correct, select the
numbers in turn
e.g.
number 1 selects the top left
hand corner of the screen, and repeat
step 2
.
Press
EXIT
to finish.
1
2
3
?
For television
operation queries,
please ring the
helpline…
Remember…
For UK only
