Toshiba 42WP56, Руководство пользователя

Страница: 22 / 28

Input selection and AV connections
22
Defining the INPUT sockets so that the television recognises connected equipment. See page 6 for a clear
view of the back connection recommendations.
Most media recorders and decoders send a signal
through the SCART lead to switch the television to the
correct
Input socket.
Alternatively press the external source selection button
B
until the picture from connected equipment
is shown.
An S in the display e.g.
B
2S ( EXT 2S ), indicates the
input is set for an S-Video signal.
Use the Input Selection if the television does not switch
over automatically.
Input selection
1
2
Press
B
to select
B
1 ,
B
2 ,
B
3 ( EXT1-3 ) or
PC .
PC displays a computer connected to Input
RGB/PC on the back of the television.
To return to television mode press
B
again or
one of the numbered buttons.
This specifies the type of signal going into SCART 2 ( EXT2 )
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SET UP menu press
Q
until
AV connection is highlighted, then press OK .
With
S
or
R
select either AV or S-VIDEO as the
required input for EXT2 .
If the colour is missing try the alternative setting.
INPUT signal selection
1
2
SET UP
Language English
Country UK
Auto tuning OK
Manual tuning OK
Programme sorting OK
AV connection OK
MENU
Back
EXIT
Watch TV
1/2
AV connection
EXT2 input S-VIDEO
MENU
Back
EXIT
Watch TV
g g