24
Setting up y
our
TV
INPUT DISPLAY
Adding channels to the TV’s memory
When you press CH or , your TV will stop only on the channels
you have programmed into the TV’s channel memory. Follow the steps
below to program channels into the channel memory.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase channels manually.
To add channels automatically:
1. Press TV to select the TV mode.
2. Press MENU, then press or to display the SETUP menu.
3. Press
▲
or
▼
until the TV/CABLE
selection is highlighted.
4. Press or to highlight either
TV or CABLE, depending on
which you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
5. Press
▼
until the CH PROGRAM selection is highlighted.
6. Press or to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW PLEASE WAIT” appears.
7. When channel programming is complete, the message “COMPLETED”
appears.
8. Press CH or to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Press TV to select the TV mode.
2. Select the channel you want to add or erase.
If you are adding a channel, you must select the channel using the
Channel Number buttons.
3. Press MENU, then press or to display the SETUP menu.
4. Press
▲
or
▼
to highlight ADD/
ERASE.
5. Press or to select either ADD
or ERASE.
6. Repeat steps 2-5 for other chan-
nels you want to add or erase.
7. Press EXIT to return to the normal
screen.
Changing channels
To change to the next programmed channel:
Press Channel
▲
/
▼
on the TV or CH
/
on the remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0-9, 100) on the remote control.
For example, to select channel 125, press 100, 2, 5.
In addition to cycling through your pro-
grammed channels, the Channel or
buttons will also cycle through the video
input sources (page 30) in the order
illustrated below.
Menu/Enter
Channel
/
Channel
Numbers
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
TV
Exit
30A0121A_En_p18-25
5/26/06, 6:25 PM
24
