14
VIDEO
AUDIO
L
R
IN
OUT
DVI
OUT
VIDEO
AUDIO
L
R
IN
OUT
HDMI
OUT
To connect an HDMI device, you will need:
• one HDMI cable (type A connector)
For proper operation, it is recommended that you use
as short an HDMI cable as possible. You should not
encounter difficulty if you use an HDMI cable that is
shorter than 16.4 ft (5m).
HDMI cable transfers both video and audio. Separate
analog audio cables are not required (see illustration
below).
You must set the HDMI audio input setting to
“HDMI” in the AUDIO menu (see page 42.)
Some CDVs (Video CDs) may not output digital audio
signals. In that case, you may hear sound by connecting
analog audio cables. If you do use analog audio cables for
this reason, you will need to set the HDMI audio input
setting to “DVI” to hear the analog audio (see page 42).
Note:
If you connect an HDMI device and analog audio
cables and play media with digital audio output, to hear
digital audio you must set the HDMI audio input setting
to “HDMI” (page 42).
To connect a DVI device, you will need:
• one HDMI–to–DVI adapter cable
(HDMI type A connector)
For proper operation, the length of an HDMI-to-DVI
adapter cable should not exceed 9.8 ft (3m). The
recommended length is 6.6 ft (2m).
• one pair of standard analog audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analog audio cables are required (see
illustration below).
You must set the HDMI audio input setting to “DVI”
in the AUDIO menu (see page 42).
The HDMI inputs on your TV receives digital audio and
uncompressed digital video from an HDMI source device,
or uncompressed digital video from a DVI (Digital Video
Interface) source device.
This inputs are designed to accept HDCP (High-Bandwidth
Digital-Content Protection) program material in digital form
from EIA/CEA-861/861B-compliant* consumer electronic
devices (such as a set-top box or DVD player with HDMI or
DVI output).
The HDMI inputs are designed for best performance with
high definition video signals. They will accept and display
480i, 480p, 720p and 1080i signals.
To ensure that the HDMI or DVI device is reset properly
,
it is recommended that you follow these procedures:
• When turning on your electronic components,
turn on
the TV first
, and then the HDMI or DVI device.
• When turning off your electronic components,
turn off
the HDMI or DVI device first
, and then the TV.
HDMI device
TV back panel
DVI device
TV back panel
Connecting y
our
TV
Connecting an HDMI™ or DVI device
NOTE: NEVER CONNECT A PC
USING ONE OF THE HDMI INPUTS.
ALWAYS use the VGA port provided to connect a PC.
Note:
You can use the both HDMI1 and HDMI2 IN for HDMI
device connection.
Note:
You can also use HDMI1 IN for DVI device connection.
In this case, you must connect the audio cables to
AUDIO L/R, not AUDIO.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing, LLC.
*
EIA/CEA-861/861B compliance covers the
transmission of uncompressed digital video with high-
bandwidth digital content protection, which is being
standardized for reception of high-definition video
signals.
Because this is an evolving technology, it is possible
that some devices may not operate properly with the TV.
30A0121A_En_p10-17
5/26/06, 6:25 PM
14
