background image

44

Using the TV’s features (General)

5.  } ~  

press 

 to edit.

Note:

 Press the red button on the remote to delete the 

timer.

 } ~

Channel

Date

Start Time

End Time

Repeat

 or 

Subtitle

  €

adjust the settings as required.

Press 

 to save the settings.

Note:

 After adjustment, the TV clock may not match the 

time in the EPG Programme Guide. The EPG Pro-
gramme Guide time follows the broadcast stream time 
which can not be adjusted.

Teletext

This television has a multi-page text memory, which 
takes a few moments to load.

Setting the Modes

1. In 

the 

PREFERENCES

$ } ~

select 

Teletext

.

RETURN

Back

Edit

PREFERENCES

HDMI CEC Control

Teletext

Panel Lock

Auto Format

4:3 Stretch

Blue Screen

Side Panel

DivX Registration

DivX Deregistration

Auto

Off

On

Off

On

1

OK

OK

2.   €

Auto

 or 

LIST

.

Navigating Pages using Auto

If Fastext is available, four coloured titles will appear at 
the base of the screen.

To access one of the four given subjects, press the 
relevant coloured button on the remote control.

For further information on your particular text system(s), 
see the broadcast text index page or, consult your local 
Toshiba dealer.

Navigating Pages using LIST

If Fastext is available, four coloured titles with numbers 
100, 200, 300 and 400 have been programmed into the 
television’s memory.

To view these pages press the relevant coloured buttons.

To change these stored pages press the relevant 
coloured button and enter a new 3 digit number. This 
number will change in the top left of the screen and in 

the coloured highlight. Press 

 to store. The bars at the 

bottom of the screen will flash white. Whenever 

 is 

pressed all four page numbers showing at the bottom will 
be stored and the previous ones will be lost. 

If 

 is not pressed the selection will be forgotten when 

text is cancelled.

Other pages may be viewed by entering the 3 digit page 
number – but DO NOT press 

 or these pages will be 

stored.

Control Buttons

Below is a guide to the functions of the remote control 
text buttons.

 Displays the index/initial page:

Press 

 to access the index/initial page. The page 

displayed is dependent on the broadcaster.

 Reveals concealed text:

To discover the solutions on quiz and joke pages press 
the 

 button.

 Holds a wanted page:

At times it is convenient to hold a page of text.

Press 

 and 

 will appear in the top left of the screen. 

The page will be held on-screen until the button is 
pressed again.

 Enlarges the text display size:

Press 

 once to enlarge the top half of the page, press 

again to enlarge the bottom half of the page. Press again 
to revert to normal size.

 Selects a page while viewing a normal picture:

Enter the page number then press 

, a normal 

picture will be displayed. The television will indicate when 
the page is present by displaying the page number at the 
top of the screen.

To display news flashes:

Select the news flash page for the chosen text service 
(see the index page of your text service).

By pressing 

, news flashes will be displayed as and 

when they are broadcast. Press 

 again to cancel the 

display.

How to change the page:

 } ~

  €"*"
is available.

The news flash page must be cancelled before changing 
channels.

Содержание 32W2300A

























































Отзывы: