Toshiba 32L3300 Series, Руководство пользователя

Страница: 33 / 54

33
Adjusting the Clock Phase of the picture
If the Clock Phase , which synchronize the PC signal
and LCD display, is not optimized, the picture will
blur.
This function enables you to adjust
Clock Phase
and display a clear picture.
1
From the PC Settings menu, press

or

to
select Clock Phase .
2
Press

or

to obtain a clear picture.
Adjusting the Sampling Clock
If the Sampling Clock does not match with the dot
clock frequency of the PC, blurred picture detail will
occur, or screen width will change, or drift patterns
in vertical lines may be apparent.
This function enables you to adjust it and optimize
the picture.
1
From the PC Settings menu, press

or

to
select Sampling Clock .
2
Press

or

to optimize the picture.
Resetting the PC Settings
The Reset function adjusts the PC Settings to the
factory settings.
1
From the PC Settings menu, press

or

to
select Reset .
2
Press OK .
3
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
NOTE:
When a PC is connected using HDMI none of these
function will be available.
Connecting your TV
Connecting a network
The LAN port allows your Toshiba TV to connect to
your network.
NOTE:
• If you use a Hub or switch to connect the TV to your
home network, you may not be able to use the
automatic setup and have to manually set up the
network address (
-
page 38).
• If you use a router with built-in DHCP functionality,
use the automatic setup. Manual setup may not
work.
• If you connect the TV and PC directly, use a crossover
LAN cable.
To connect the TV to a network - Wired
TV back view
LAN
Cable or
Phone jack
Modem Router with Hub
Server PC
[1] [2]
[2]
[2][3]
[1] Coaxial or telephone cable (depending on your
modem type)
[2] Standard LAN cable
[3] DO NOT connect a phone jack directly to the TV’s
LAN port.
3239L3300Series̲En.indd 33 3239L3300Series̲En.indd 33 2013/08/08 18:26:18 2013/08/08 18:26:18