29
Connecting your TV
Back connections
Connection example
TV back view
Y
P
B
/C
B
P
R
/C
R
L/
MONO
L/
MONO
AUDIO
AUDIO
VIDEO
R
R
AUDIO(FIXED)
COMPONENT/
VIDEO INPUT
(1)
(2)
VIDEO
VCR (Normal)
DVD video player
(with component
video outputs)
Set Top Box
Audio system
or
or
•
Before connecting any external equipment, turn
off all main power switches.
•
The unauthorized recording of TV programmes,
DVDs, video tapes and other materials may
infringe upon the provisions of copyright law.
•
The
COMPONENT VIDEO INPUT
consists of three
component video signals (
Y
,
PB/CB
,
PR/CR
) and
provides the best picture performance. These
terminals can only be used with the component
video compatible equipment e.g. DVD video
player, etc.
•
If you connect to COMPONENT VIDEO for
the
COMPONENT / VIDEO INPUT
terminals, screen
display will appear changes to
COMPONENT
.
•
Additional equipment and cables shown are not
supplied with this TV.
NOTE:
o
(1) COMPONENT / VIDEO INPUT terminals
Red
(Audio)
White
Green
Blue
Red
Yellow
Standard mode
Component mode
Y
P
B
/C
B
P
R
/C
R
L/
MONO
AUDIO
R
COMPONENT/
VIDEO INPUT
(1)
VIDEO
Y
P
B
/C
B
P
R
/C
R
L/
MONO
AUDIO
R
COMPONENT/
VIDEO INPUT
(1)
VIDEO
Red
White
Connecting an audio system
You can enjoy high quality dynamic sound by
connecting the TV to an audio system.
NOTE:
•
DO NOT connect the
DIGITAL AUDIO
output
terminal to the AC-3 RF input of a Dolby Digital
Receiver with a built-in Dolby Digital decoder.
•
Connect the
DIGITAL AUDIO
output terminal to the
OPTICAL
input of a receiver or processor.
•
Refer to the owner’s manual of the connected
equipment as well.
•
When you connect the TV to other equipment, be
sure to turn off the power and unplug all of the
equipment from the wall outlet before making any
connections.
•
The output sound of the TV has a wide dynamic
range. Be sure to adjust the audio amplifi er’s volume
to a moderate listening level before turning on the
power. Otherwise, the speakers and your hearing
may be damaged by sudden high volume audio.
•
Turn off the amplifi er before you connect or
disconnect the TV’s power cord. If you leave the
amplifi er power on, the speakers may be damaged.
Warning:
When you are connecting (via the
DIGITAL AUDIO
output terminal) an AV decoder that does not have
Dolby Digital decoding function, be sure to set
PCM
for
Digital Audio Output
menu (
-
page 23).
Otherwise, the speakers and your hearing may be
damaged by sudden high volume audio.
Connecting an amplifi er equipped with a Dolby Digital
decoder
To Digital Audio
output terminal
To
Optical
type
digital audio input
Optical
digital cable
(not supplied)
Amplifier equipped with
Dolby Digital decoder
Front speaker
Surround speaker
Sub woofer
Centre speaker
Signal flow
TV back view
DIGITAL
AUDIO
You can enjoy dynamic realistic sound by
connecting the TV to an amplifi er equipped with a
Dolby Digital decoder or Dolby Digital processor.
When using this setup, select
Auto
in the
Digital
Audio Output
menu (
-
page 23).
3239L3300Series̲En.indd 29
3239L3300Series̲En.indd 29
2013/08/08 18:26:17
2013/08/08 18:26:17
Содержание 32L3300 Series
Страница 54: ......
