Toshiba 32L255 Series, Руководство пользователя, Страница: 22 / 56

22
Using the TV’s features
Activating the picture preferences
You can customise current Picture Mode settings as
desired. For example, while selecting " Dynamic ", if
you change the following items, such as Backlight ,
Contrast , Brightness , Colour , Tint , Sharpness , and
the Picture Settings items, your new setting are
saved for " Dynamic " Picture Mode .
1
From the Picture Settings menu, press

or

to select either Backlight , Contrast ,
Brightness , Colour , Tint or Sharpness .
2
Press

or

to adjust the settings as desired.
Setting the Contrast Booster
Contrast Booster improves the defi nition of dark
areas of the picture.
1
From the Picture Settings menu, press

or

to select Contrast Booster .
Standard
Picture Settings
Picture Mode
Backlight
Contrast
Brightness
Colour
Tint
Sharpness
Contrast Booster Middle
50
50
0
0
70
100
2
Press

or

to select Middle , High , Off or
Low .
Using the Cinema Mode
This feature will reduce picture blur without
decreasing image brightness or adding fl icker.
1
From the Picture Settings menu, press

or

to select Cinema Mode .
2
Press

or

to select On or Off .
Adjusting the Colour Temperature
Colour Temperature increases the warmth or
coolness of the picture by setting the red, green or
blue tint.
1
From the Picture Settings menu, press

or

to select Colour Temperature , then press OK .
2
Press

or

to select Auto , Cool , Natural , or
Warm to suit your preference.
Cool
Colour Temperature
Colour Temperature
Red Level
Green Level
Blue Level
Reset
0
0
0
3
Press

or

to select Red Level , Green Level
or Blue Level , then press

or

to adjust the
setting as required.
Resetting the Colour Temperature
This function resets your colour temperature
settings to the factory settings.
1
From the Colour Temperature menu, press

or

to select Reset , then press OK .
2
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
1
From the Picture Settings menu, press

or

to select Noise Reduction , and then press OK .
On
Auto
Auto
Noise Reduction
Auto Clean
MPEG NR
DNR
2
Select Auto Clean , and then press

or

to
select On or Off .
Off mode :
MPEG NR
menu and DNR menu are available.
• MPEG NR mode: Low , Middle , High or Off
• DNR (Digital Noise Reduction) mode: Low ,
Middle , High or Off
Resetting the Picture Settings
This feature resets the Picture Settings to the
factory settings.
NOTE:
If no picture settings have been changed, Reset is not
available.
1
From the Picture Settings menu, press

or

to select Reset , and then press OK .
2
A confi rmation message will appear. Press

or

to select Yes , and then press OK .
32405055L2550̲EN.indd 22 32405055L2550̲EN.indd 22 27/02/02 15:40:09 27/02/02 15:40:09