18
DTV Manual Tuning
Note:
The content of this menu varies depending on the DTV
input that is currently selected.
This feature is available for service engineers or can
be used for direct channel entry if the multiplex
channel is known.
1
From the
SETUP
menu, press
or
to select
DTV Manual Tuning
and press
OK
.
DTV Manual Tuning
Channel
Start Scan
25
Frequency
Bandwidth
506.0 MHz
8 MHz
Signal Booster
On
WEAK
Signal Strength
Quality
GOOD
STRONG
AVERAGE
100%
2
Use
or
to change the settings.
•
The
Number
buttons can be used to enter the
Frequency
.
3
Select
Start Scan
and press
OK
.
The television will automatically search for that
multiplex.
DTV Manual Tuning
1
2
7
40
51
ABC ONE
ABC TWO
ABC THREE
ABC 24
ABCi
1 New Channels – Total 6
New
Pos.
Type
Name
When the multiplex is found, any channels
that are not currently in the channel list will be
added and the channel information at the top
of the screen will be updated. ("
♦
" icon appears
on the
New
column of the newly added
channels.)
4
Repeat as necessary. Press
EXIT
to fi nish.
DTV Settings
Channels
The channel order may be changed to suit your
personal preference.
1
From the
SETUP
menu, press
or
to select
DTV Settings
and press
OK
.
2
Select
Channels
and press
OK
.
DTV Settings
Subtitle and Audio
Parental Control
Dynamic Scan
On
Signal Booster
Over-the-air Upgrade
PIN Setting
Channels
3
For your convenience, you can jump to specifi c
places in the list by
Line No. Jump
.
Channels
2
7
40
51
ABC TWO
ABC THREE
ABC 24
ABCi
Line No.
1/10
Pos.
Name
1
ABC ONE
822
823
AA
AC
Type
Line No. Jump
—Use the
Number
buttons (0-9)
to input the line number you want to select and
press
OK
.
Renumber
—Press the
RED
button to renumber
the highlighted channel. Edit the channel
number using the
Number
buttons and press
OK
. If the position number you input already
exists, a confi rmation window will appear.
Move
—Press the
GREEN
button to activate
the
Move
feature. Press the
or
buttons to
select the channel you wish to move and press
OK
to check.
If you wish to move multiple channels at once,
select another channel and check in the same
way. Repeat as necessary.
Once all desired channels have been checked,
press the
or
buttons to place the focus
at the position to which you wish to move the
channels. The channels will be inserted above
the highlighted channel. Press the
GREEN
button to execute the move.
Introduction / Getting started
32405055L2550̲EN.indd 18
32405055L2550̲EN.indd 18
27/02/02 15:40:08
27/02/02 15:40:08
