16
*DTV auto tuning/Setting Antenna or Cable
Preparations:
• Turn on the TV with the
button on its left
side.The
power
indicator will light green.
To place the TV in
standby mode, press
on the remote control.
Power indicator will
change from green to red.
To turn on the TV from
standby mode, press
on the remote control
again.
In standby mode, you can
also turn the TV on with
on the TV or
CH
on the remote
control.
To turn off the TV, press
button on it; to
completely switch it off,
disconnect the mains
power supply.
• Press
TV/DVD
to
select TV mode.
• Press
ATV/DTV
to
toggle between analogue
TV and digital TV mode.
Note:
• If no button is pressed
after approximately 60
seconds, the Main Menu
screen will disappear.
• Press
EXIT/CANCEL
to exit the Main Menu
screen.
Auto Tuning
will completely re-tune your TV and can be used to update the channel list. It is
recommended that DTV auto tuning is run periodically to ensure new services are added. If the
setting of
Ant/Cable In
is changed the
Auto Tuning
screen will automatically appear. All current
programmes and settings will be lost.
1
Press
INPUT
to select
ATV
or
DTV
, and then press
ENTER/CH LIST
.
2
Press
MENU SETUP
in ATV (analogue TV) mode or press
DIGITAL MENU
in DTV
(digital TV) mode to display the Main Menu screen.
When
DIGITAL MENU
is pressed in ATV mode, it will automatically switch to DTV mode.
And it is possible to use
MENU SETUP
in DTV mode.
3
Press
to select
Channel
, and then press
ENTER/CH LIST
.
4
*
Press
to select
Ant/Cable In
, and then press
to select between
Antenna
or
Cable
for
your TV.
Note:
• A DVB-C notice will appear when you switch
Antenna
to
Cable
. Please check if this function is
supported in the place you live, and if the latest
firmware has been installed on your TV (see
DVB-
C Notice
on page 2 and
DVB-C function notice
on page 12).
A message prompt will appear warning that the previously stored channels will be lost.
Press
to select
Yes
or
No
, and then press
ENTER/CH LIST
.
Note:
• If DVB-C function is unavailable, the message prompt will not appear.
5
Press
to select
Country,
and then press
to select your country.
6
Press
to select
Auto Tuning
, and then press
ENTER/CH LIST
.
Setting Antenna:
(1) When
Ant/Cable In
is set to
Antenna
, a
message prompt will also appear with option to
delete previously stored channels.
Press
to select
Yes
or
No
, and then press
ENTER/CH LIST
.
/
/
/
Main Menu
Picture
Sound
Channel
Setup
/
/
Ant/Cable In Antenna
Country Germany
>>
>>
>>
: Adjust
/
/
/
/
/
: Adjust
Auto Tuning will delete all previously
stored channels -
Do you want to proceed?
Yes
No
