8
Location of controls
Description of indicators and controls
1.
POWER indicator:
The Power indicator lights red in standby mode, and green when TV is powered on.
2.
Remote sensor
3.
Auto Brightness Sensor:
This sensor will detect the ambient light conditions to optimize the backlighting level (see page
12).
4.
Disc slot:
Load the disc into the disc slot to view or listen.
5.
EJECT:
Press to eject a disc.
6.
/ -:
Press to adjust the volume level. In Menu: Setting.
7.
PLAY
/
CHANNEL :
Press
to change to a higher numbered channel set into memory.
In DVD mode: Playback. In Menu: Functions as up menu navigation button. In Standby mode: Turn the TV on.
8.
STOP
/
CHANNEL :
Press
to change to a lower numbered channel set into memory.
In DVD mode: Stop. In Menu: Functions as down menu navigation button. In Standby mode: Turn the TV on.
9.
MENU:
Press to access the menu system.
10.
INPUT/ENTER:
Select video input source. In Menu: Use as an
ENTER
button to confirm selection.
11.
POWER button:
Connect the supplied AC power cord to 110-240V/50-60Hz AC outlet, and then press the button to
turn the TV on and off.
12. HDMI 2 input:
High-Definition Multimedia Interface (
HDMI 2
) input receives digital audio and uncompressed digital video
from an HDMI device or uncompressed digital video from a DVI device. HDMI connection is necessary to receive 1080p
signals (see pages 71-73).
13. USB terminal:
For use when inserting a USB device.
1
2
3
4
5
12
13
6
7
8
9
10
11
