Toshiba 32C2000A, Руководство пользователя

Страница: 25 / 44

25
Using the TV’s features (General)
Setting the Alarm
- digital only -
This function will turn on the TV to go to a specific TV mode
or channel at a certain time.
1
From the
PROGRAM
menu.
2
Press or to select Alarm , then press
Q
.
3
Press or to select Mode and or to choose Off ,
Once
,
Mon-Fri
or
Daily
.
4
Press or to select Time and or to select time
for TV to wake up in 10-minute increments.
5
Press or to select TV mode and or to select
the TV mode or input source you want to adjust.
6
If TV mode is set to ATV or DTV , press or to select
Channel and or to select desired channel to be
turned on.
7
Press
Q
to save the above settings. If you have selected
a locked channel or activated
Parental Rate
, enter
password when prompted.
Notes:
• You must press
Q
to save the Alarm settings before you exit
the menu, otherwise all newly set values will be discarded.
• If TV is already turned on when Alarm is activated, the TV will
simply switch to the specific TV mode or channel at the
Alarm start time.
• If TV is already running the Program Timer when Alarm is set
to activate on DTV mode, on Alarm activation the Alarm will
only turn on the TV (if it was in standby) but not switch to the
channel specified in the Alarm setting.
• If TV is already running the Program Timer when Alarm is set
to activate on a TV mode other than DTV, the Alarm will
perform normally.
•
If you do not press any button on the side panel of the TV or
the remote control within 2 hours after Alarm is activated, the
TV will enter standby automatically.
Setting the sleep timer
- analog only -
The Sleep timer is especially useful if you want the TV to turn
itself off after a selected period of time.
1
Press
M
, then press or to display the
TIMER
menu.
2
Press or to select Sleep timer .
3
Press
Number
buttons (0-9) to set the time period to turn
off the TV. Alternatively, press or to set the time
period. The timer display will set in blocks of 10 minutes
to 12 hours and 50 minutes. If you press and hold
or
to set the time period, timer display will set in blocks of
30 minutes up to 12 hours 30 minutes.
4
Press
P
to start the timer.
Selecting the video input source to
view
1
Press
o
on the remote control to display the video input
mode list, then press or to select appropriate input
source (or press
o
on the TV side panel or
o
on the
remote control repeatedly to select required input source
directly). In Analog TV, you may also press
Q
to display
the video input mode list.
2
Press
Q
.
o
1 (
o
(1), video 1 input) or
o
1C (component video
input),
o
2 (
o
(2), video 2 input) or
o
2S (S-video input),
HDMI1, HDMI2 (
o
HDMI1 or
o
HDMI2, HDMI
input),
PC (
o
RGB/PC, PC input)
ATV (Analog TV)
DTV (Digital TV)
Mode
Time
TV mode
Alarm
11:30 AM
Back Enter Select Function
Channel
ATV
Off
02
TIMER
MENU Back Watch TV EXIT
Sleep timer 00:00
Ex. PC VGA mode
PC VGA
HDMI1
HDMI2
PC
ATV
DTV
2
1