background image

6

Introduction

Cleaning

1) Remove the power plug before cleaning.

Never use solvents such as benzine or thinner to clean 
the TV.
• These solvents may distort the cabinet or damage its 

finish.

• If rubber or vinyl products remain in contact with the 

TV for a long time, a stain may result.

If the cabinet becomes dirty, clean it with a soft, dry 
cloth.
When cleaning the surface of the LCD display, wipe the 
panel surface gently with a soft, dry cloth.

2) Periodically disconnect the power plug from the 

outlet and check it. 
If dust has collected on the power plug connectors, 
clean off the dust with dry cloth.

This dust may cause a fire due to reduced insulation on 
the plug.

Important information

1) About LCD screen

• If you have the LCD screen facing to the sun, the LCD 

screen will be damaged. Be aware of locating the TV 
in the place such as window side or outside of the 
room.

• Never press the LCD screen strongly or scratch it, 

and never put anything on it. These actions will 
damage the LCD screen.

2) About cabinet and LCD screen

Never spray volatile compounds such as insecticide on 
the cabinet and LCD screen.
This may cause a discoloration or damage the cabinet 
and LCD screen.

3) Some pixels of the screen do not light up

The LCD display panel is manufactured using an 
extremely high level of precision technology, however 
sometimes some pixels of the screen may be missing 
picture elements or have luminous spots. This is not a 
sign of a malfunction.

4) About Interference

The LCD display may cause interference in image, 
sound, etc. of other electronic equipment that receives 
electromagnetic waves (e.g. AM radios and video 
equipment).

5) About using under the low temperature places

If you use the TV in the room of 0°C or less, the picture 
brightness may vary until the LCD monitor warms up. 
This is not a sign of a malfunction.

6) About afterimage

If a still picture is displayed, an afterimage may remain 
on the screen, however it will disappear.
This is not a sign of malfunction.

Exemptions

• Toshiba is not liable for any damage caused by fires, natural 

disaster (such as thunder, earthquake, etc.), acts by third 
parties, accidents, owner's misuse, or uses in other improper 
conditions.

• Toshiba is not liable for incidental damages (such as profit 

loss or interruption in business, modification or erasure of 
record data, etc.) caused by use or inability to use of product.

• Toshiba is not liable for any damage caused by neglect of 

the instructions described in the owner's manual.

• Toshiba is not liable for any damage caused by misuse or 

malfunction through simultaneous use of this product and 
the connected equipment.

Clean here 

Содержание 32C2000A













































Отзывы: