Toshiba 29CZ5DE, Руководство по обслуживанию

Страница: 9 / 50

GENERAL ADJUSTMENTS
– 9 –
4. SELECTING THE ADJUSTING ITEMS
1) Every pressing of CH
s
button in the service mode changes the adjustment items in the order of table-2.
(
t
button for reverse order)
Refer to table-2 for preset data of adjustment mode.
(See SETTING & ADJUSTING DATA on page 14)
5. ADJUSTING THE DATA
1) Pressing of
;
+/– button will change the value of data in the range from 00H to FFH. The variable range depends on
the adjusting item.
6. EXIT FROM SERVICE MODE
1) Pressing POWER button to turn off the TV once.
R
INITIALIZATION OF MEMORY DATA OF QA10
After replacing QA10, the following initialization is required.
1. Enter the service mode, then select any register item.
2. Press and hold the CALL button on the remote control, then press the CH
s
button on the TV. The initialization of QA10
has been completed.
3. Check the picture carefully. If necessary, adjust any adjustment item above.
Perform “ASM function” on the owner’s manual.
CAUTION: Never attempt to initialize the data unless QA10 has been replaced.