Toshiba 2805-S301 - Satellite - PIII 650 MHz, Руководство пользователя

Страница: 236 / 282

236
If Something Goes Wrong
Resolving a hardware conflict
Refer to the card’s documentation, which should contain a
troubleshooting section.
Printer problems
This section lists some of the most common printer problems:
The printer will not print.
Check that the printer is connected to a working power outlet,
turned on and ready (on line).
Check that the printer has plenty of paper. Some printers will not
start printing when there are just two or three sheets of paper left in
the tray.
Make sure the printer cable is firmly attached to the computer and
the printer.
If your printer is ECP- or IEEE 1284-compliant, make sure you
have an IEEE 1284 printer cable.
Run the printer’s self-test to check for any problem with the printer
itself.
Make sure you installed the proper printer drivers, as shown in
“Setting up a printer” on page 59 .
You may have connected the printer while the computer is on.
Disable Standby mode, turn off the computer, and turn off the
printer. Turn the printer back on, make sure it is on line, then turn
the computer back on.
Try printing another file. For example, you could create and
attempt to print a short test file using Notepad. If a Notepad file
prints correctly, the problem may be in your original file.
Contact your network administrator if the printer is on your office
network.