Toshiba 2455 S305 - Satellite - Pentium 4 2.4 GHz Скачать руководство пользователя страница 190

Страница: 190 / 295

190

Exploring Your Options

Using PC Cards

5.375 x 8.375 ver 2.4.1

Before you insert a PC Card, refer to the documentation that
comes with the card to see if you need to do anything before you
insert it.

If your PC Card does not support hot swapping, save
your data and turn off the computer before inserting the
PC Card. For more information, see

“Hot swapping a PC

Card” on page 191

Hold the PC Card with the arrow or main label side up
and the connector side toward the desired slot.

Align the card connectors with the desired PC Card slot
and carefully slide the card into the slot until it locks into
place.

Inserting a PC Card

CAUTION: To avoid damaging the PC Card or the computer, don’t
force the card into a PC Card slot.

Removing a PC Card

Click the

Safely Remove Hardware

icon on the System

tray.

Содержание 2455 S305 - Satellite - Pentium 4 2.4 GHz








































































































































































































































































































Результаты поиска

Содержание 2455 S305 - Satellite - Pentium 4 2.4 GHz

Отзывы:

Toshiba 2455 S305 - Satellite - Pentium 4 2.4 GHz, Руководство пользователя, Страница: 190 / 295

Результаты поиска

Содержание 2455 S305 - Satellite - Pentium 4 2.4 GHz

Отзывы: