
-115-
10
Operation during battery charge by AC power supply
This chapter describes the printer operations when the battery is charged through the AC adapter.
10.1 In Printer Power Off State
(1) When the AC adapter is being connected with the battery installed:
LCD
No display (Same as power off)
LED
[STATUS] LED (Green)
................................... O
FF
[CHARGE] LED (Orange)
Charging ..................... ON
Full charge ................. OFF
If a USB cable is connected to the printer and the printer power is turned on under the above condition, the USB
interface may not work.
(This symptom occurs only when the USB cable is connected to the printer anytime between a connection of
the AC adapter in the printer power off state and a power on under the above condition.) This problem can
be solved by turning off the printer after disconnection of the AC adapter or removing and inserting the battery
again.
In charging, it doesn
’t display battery percentage.
* Sometimes it doesn
’t display 100 % at full charge because of battery deterioration or environment.
Содержание B-FP Series
Страница 32: ... 26 32 핀 33 YES 34 NO 35 OK 36 실패 37 취소 38 승인 39 거부 ...
Страница 45: ... 39 7 2 1 1 COUNTER PARAMETER PRINT CONTENTS 1 B FP3D GH GS30 ...
Страница 46: ... 40 2 B FP3D GH GS40 ...