toscano T-500, Руководство пользователя

Страница: 11 / 20

Page 11
ITM-MAGMETER-T500-ED2
Main menu options are displayed in sixteen lines.
You may select the English, Italian, Spanish and/or German language for communication. English is pre-set
as standard.
Use following keys to select an option:
scroll down by one line
scroll down by one line
move to the left by one position; it returns to the beginning of the menu in the main menu
move to the right by one position; it shifts to the end of the menu in the main menu
confi rm selection
Cursor is blinking in the position of the option selected.
A. Menu options, commands
Main menu options
RETURN Return to previous LANGUAGE
Language selection (English, Ita-
lian, Spanish, German)
ANALOG
OUTPUT
Configuration of analogue output
PULSE OUTPUTS
Configuration of multifunctional
(pulse) outputs
COMPARATOR
Selection of logical functions for
multifunctional (pulse) outputs
FREQUENCY
OUT.
Configuration of frequency output
DAMPING
Instrument damping
COMMUNICATION
Configuration of communication
ports (RS232, GSM modem)
DATALOGGER
Configuration of internal datalo-
gger
SIMULATION
Flow simulation
SENSOR
Downloading of sensor calibration
parameters, setting of the flow
range measured
MEASUREMENT
Permit to measure the flow in
negative direction, setting of the
zero flow zone, configuration of the
empty tubing detection function
TIME
Configuration of internal real-time
clock
PASSWORD
Password setting
DISPLAY
Selection of immediate flow rate
units and displayed decimal places
of counters
SERVICE
Counter reset, check of the AD
transducer function, information on
software version