- 7 -
3.1. - LABELING PRE-PACKING MODE
* Printer Opening:
Pull the release lever on the right side of the scale
toward the front of the scale as shown in the image
on the left.
* Closing the Printer:
Once the roll of labels or tickets has been installed,
lift the lock lever on the front of the scale
.
1. - Open the printer.
2. - Place the roll of labels in the roll holder.
3. - Unroll 30cm and remove 6 labels from the roll manually, make sure it passes under the tensioners
.
.
and through the paper sensor.
4. Wrap the remaining residue of the roll counterclockwise.
5. - Close the printer.
