- 55 -
Your iOS device will use the scale’s ip address as well as the nework’s name to connect to it.
On your iOS device select the network that your scale created.
When initializing the app you must
type in the ip address on the section:
IP
Select connect to: Scale
Then press:
Register
The iOS device will ask you for a
password which is 123456 by
default.
Once you type in the password the
app will show a message showing
the connection was successful.
27.2.- INITIAL SCALE’S CONFIGURATION ON THE IOS DEVICE.
Choose
Settings.
On this Screen you can see 3 options to pick from.
Section 27.2.1 General settings from the iOS device.
P. 56.
Section 27.2.2. Headlines. P.58.
Section 28.2.3 Printing Format. P. 60.
