Torrey L-EQ 10/20-HS, Руководство пользователя

Страница: 5 / 19

Dear customer:
We appreciate that you have chosen this product. We assure you that you
will get the maximum satisfaction of the new acquisition for your business.
We suggest you to read carefully this manual and make sure to keep it at
hand for later consultations.
INSTALLATION GUIDE
INTRODUCTION
IMPORTANT NOTE: If, when performing the steps described above, the
scale shows the word "HELP" it means that it was mistreated and / or
hit during transport, which caused irreversible damage. If so, contact
your authorized dealer. It is also possible that the scale shows "HELP"
when it is lit with a product on the plate, in this case, remove the
weight from the scale, turn it off and then on again.
1. Unpack the scale and check that it is in good
condition. If you find any damage, notify your
authorized dealer immediately.
2. Place the scale in a place free of movements
and vibrations, make sure it is level, checking
that the four leveling feet hold the scale on
the surface where you have placed it and
that the leveling bubble (under the plate) is
centered. Adjust, tight or loose the leveling
feet until the bubble is in the center of the
circle.
3. Connect the AC/DC adapter (if used) to a
110/220VAC output.
4. Turn on the scale and observe in the viewer /
screen:
5
Portioning Scale