59
Deutsch
English
• First tilt the motor up. To do so the kick lever
must be in the “Tilt/Auto kick-up” position.
• Tilt the motor up by pulling the handle
on the back end of the aluminum cage
until the engine clicks into one of the
upper positions.
• Remove the trimming bolt‘s retaining ring
and pull it out of the transom mount.
• Select the trimming position you want and
insert the trimming bolt into the
corresponding borehole. You must insert
the trimming bolt through both side
walls of the transom mount. Finally you
must fix the trimming bolt again with the
retaining ring.
• In order to move the motor downwards
again you must first lift the motor onto
the handle of the aluminum cage above
the release position and then press the
lever again to release the tilt mechanism
(refer to drawing). With the lever pressed,
allow the motor to move down to the
desired position slowly.
1. Raise here
2. Pull release
lever
