COMMANDER XT1000 / XT2000
User Manual
Rev 1.06
57 |
P a g e
11.
Does it possess the ability of measuring angular rotation?
–
Without a transducer and gyroscope
installed on the wrench, we cannot measure angular rotation. However, with pumps that possess
flow meters with output, we can measure and correlate flow to rotation. Similarly, if the pump has
an ammeter with output, we can see when the pump is under load (rotation) and not.
12.
What if there is no Wi-Fi access?
- If you're out in the field and away from a Wi-Fi connection,
the Commander XT’s can utilize its on
-board cellular capability to send data. When neither Wi-Fi
nor cellular are available, you
can retain the data to the Commander XT’S internal SD card, until
which time either Wi-Fi or cellular connectivity returns. It will then automatically send all unsent data.
13.
Can I note defects observed?
-
The Commander XT’S are capable of collecting any t
ype of
attribute data. Unlimited text comments can be included in each set of data. With the high
resolution built-in camera, detailed pictures of the defects can be easily captured and stored.
14.
Can I enter traceability data?
- Traceability is key to understanding the quality of the assembly
procedure and being able monitor changes over time. The number of traceability fields for a
particular assembly is unlimited and is configurable by each user. Standard traceability fields are
operator, flange serial #, GPS location, tool, etc., and are entered by pick list, barcode or keyboard.
15.
Can we send alerts in the event of a problem?
- Email, text or cell phone alerts can be sent if
an error occurs either in the assembly or in the tools calibration. Torq-Comm takes the decision
making
out of the operator’s hands and plac
es it back into the
supervisor’s
hands to provide
real time decisions.
16.
Must I store my data to a cloud?
–
You can transmit directly a local PC or server should you wish to
keep the data in house.
17.
Whose pump does this work with?
- By incorporating a Bluetooth pressure gauge, the
Commander XT’S can interface with most manufacturers’ pump in order to collect the
necessary assembly data. Optional mounting kits will be available according to the pump being
used.
18.
Can I collect data that is not circular in nature like a flange?
- With an optional design module,
you can create unique, non-circular assembly procedures for your assembly control.
19.
Is it unique?
–
Torq-Comm has a patent pending on this technology. Other competitors have data
collection methods, but nothing as sophisticated and innovative as the mobile Commander XT’S.
