COMMANDER XT1000 / XT2000
User Manual
Rev 1.06
45 |
P a g e
3.
The new Torque Wrench can quickly be identified by inputting the Torque Wrench serial
number if available. This can be done by scanning a barcode label on the Torque
Wrench or typing in the number. Tap on the Barcode symbol as shown.
4.
Tap on the Serial Number Input Box. You can scan the barcode label on the tool using
one of the three orange buttons on the COMMANDER or type the number by hand. Tap
OK
to continue.
Note: The COMMANDER will warn the operator if the target pressure is outside the
range of the Torque Wrench selected and will not permit them to continue until a
suitable wrench is selected.
