
COMMANDER XT1000 / XT2000
User Manual
Rev 1.06
1 |
P a g e
ABOUT THE COMMANDER
MOBILE COMPUTER
Torq-
Comm’s COMMANDER XT1000 is a rugged IP65 sealed handheld PC for PRODUCTION
CONTROL that provides up to the minute work instructions and bolting schematics to the operators
in the field or factory. The work instructions are downloaded in real time to guide the operator
through the entire assembly process while providing DATA COLLECTION during the bolting process.
This data, along with an unlimited amount of user-definable traceability information (such as
operator, tool etc.), can then be stored on the Commander XT1000 or sent via Wi-Fi or cellular to a
Cloud server immediately upon completion for remote storage and analysis. Equipment, materials
and torqueing data for each bolt is automatically date & time stamped along with a GPS location.
With front and rear facing high resolution cameras, barcode scanning with a 1D/2D imager or 1D
laser scanner, as well as integrated RFID and NFC reading capabilities, Bluetooth, Wi-Fi, and 3G-4G
cellular capability, almost all data collection scenarios are possible. Smart battery power
management ensures you’ll get through your busy day effortlessly.
The COMMANDER XT1000 survives repeated 5’ drops to concrete across a wide operating
temperature range, is sealed to IP65 standards and is UL 1604 Class 1 Div. 2 (A, B, C, D) certified
to provide ultimate reliability and safety in extreme and hazardous locations.