Toro Z355 Z-Master Скачать руководство пользователя

Страница: 60 / 60

LCE

The Toro Total Coverage Guarantee

A One-Year Limited Warranty

Conditions and Products Covered

The Toro Company and its affiliate, Toro Warranty Company,

pursuant to an agreement between them, jointly promise to repair

any Toro Product used for commercial, institutional, or rental

purposes if defective in materials or workmanship. The following

time periods apply from the date of purchase:

Products

Warranty Period

•

All Products

1 year

•

All Spindles

2 years parts and labor;

third year, parts only

•

Engines/Hydraulic Systems* on

the following:

2 years

Outfront and Mid-Mount Z’s
ProLine Mid-Size Mowers
Groundsmaster

Riding Mowers

Backpack Blowers

•

Deck Shells (36

″

–72

″

) on the

following:

2 years

ProLine Mid-Size Mowers
Mid-Mount Z’s

•

Electric Clutch on 200 Series

Mid-Mount Z’s

2 years

This warranty includes the cost of parts and labor, but you must

pay transportation costs.
This warranty applies to:

•

Outfront and Mid-Mount Z’s

•

ProLine Mid-Size Mowers

•

Groundsmaster Riding Mowers

•

Turf Maintenance Equipment

•

Debris Management Equipment

* Some engines used on Toro LCE Products are warranted by the

engine manufacturer.

Instructions for Obtaining Warranty Service

If you think that your Toro Product contains a defect in materials or

workmanship, follow this procedure:
1

Contact any Toro Authorized or Master Service Dealer to

arrange service at their dealership. To locate a dealer

convenient to you, access our website at www.Toro.com. U.S.

Customers may also call 800-348-2424.

Bring the product and your proof of purchase (sales receipt) to

the Service Dealer.

If for any reason you are dissatisfied with the Service Dealer’s

analysis or with the assistance provided, contact us at:

LCB Customer Service Department
Toro Warranty Company
8111 Lyndale Avenue South
Bloomington, MN 55420-1196
888-577-7466 (U.S. customers)
877-484-9255 (Canada customers)

Owner Responsibilities

You must maintain your Toro Product by following the maintenance

procedures described in the operator’s manual. Such routine

maintenance, whether performed by a dealer or by you, is at your

expense.

Items and Conditions Not Covered

There is no other express warranty except for special emission

system coverage on some products. This express warranty does

not cover the following:

•

Cost of regular maintenance service or parts, such as filters,

fuel, lubricants, tune-up parts, blade sharpening, brake and

clutch adjustments.

•

Any product or part which has been altered or misused or

required replacement or repair due to normal wear, accidents,

or lack of proper maintenance.

•

Repairs necessary due to improper fuel, contaminants in the

fuel system, or failure to properly prepare the fuel system prior

to any period of non-use over three months.

•

Pickup and delivery charges.

All repairs covered by this warranty must be performed by an

Authorized Toro Service Dealer using Toro approved replacement

parts.

General Conditions

Repair by an Authorized Toro Service Dealer is your sole remedy

under this warranty.
Neither The Toro Company nor Toro Warranty Company is liable

for indirect, incidental or consequential damages in connection

with the use of the Toro Products covered by this warranty,

including any cost or expense of providing substitute equipment or

service during reasonable periods of malfunction or non-use

pending completion of repairs under this warranty.
Some states do not allow exclusions of incidental or consequential

damages, or limitations on how long an implied warranty lasts, so

the above exclusions and limitations may not apply to you.
All implied warranties of merchantability (that the product is fit for

ordinary use) and fitness for use (that the product is fit for a

particular purpose) are limited to the duration of the express

warranty.
This warranty gives you specific legal rights, and you may also

have other rights which vary from state to state.

Countries Other than the United States or Canada

Customers who have purchased Toro products exported from the United States or Canada should contact their Toro Distributor (Dealer)

to obtain guarantee policies for your country, province, or state. If for any reason you are dissatisfied with your Distributor’s service or

have difficulty obtaining guarantee information, contact the Toro importer. If all other remedies fail, you may contact us at Toro Warranty

Company.

Part No. 374-0037 Rev. B

Содержание Z355 Z-Master





























































Результаты поиска

Содержание Z355 Z-Master

Отзывы:

Похожие инструкции для Z355 Z-Master

Бренды по названию

Популярные бренды

Toro Z355 Z-Master, Руководство оператора

Результаты поиска

Содержание Z355 Z-Master

Отзывы:

Похожие инструкции для Z355 Z-Master

Бренды по названию

Популярные бренды