Toro Z Master 3000 SERIES, Инструкции по установке

Страница: 7 / 16

g010184
Figure 12
4. Plug the harness connector into the seat switch
located under the seat towards the front.
5. Install the seat to the machine frame with 4
flange nuts (3/8 inch).
g010185
Figure 13
1. Harness connector 2. Flange nuts
Installing the Seat on Models with
a Tilting Seat
1. Tilt the seat frame up.
2. For deluxe seats only, install the spacers as
shown in
Figure 14 .
g030558
Figure 14
For machines with a deluxe seat only
1. Deluxe seat 3. Seat frame
2. Long spacer 4. Short spacers
3. Install the seat to the seat frame with 4 flange
nuts (3/8 inch) as shown in
Figure 15 .
4. Plug the harness connector into the seat switch
located under the seat toward the front.
g010192
Figure 15
1. Seat switch 3. Harness connector
2. Flange nuts
7