Procedure
Description
Qty.
Use
Air-cleaner cap
1
14
Hose clamp
1
Install the air-cleaner cap (international
machines using gasoline only).
15
Rollover Protection System (ROPS) Kit
1
Install the ROPS (international machines
using gasoline only).
Roll bar, right section
1
Roll bar, left section
1
Roll bar, center section
1
Bolt (3/8 x 1 inch)
8
Curved washer
8
Flange nut (3/8 inch)
8
Bolt (1/2 x 3-1/4 inches)
2
16
Flange nut (1/2 inch)
2
Install the ROPS (diesel machines only).
17
No. 2 lithium or molybdenum grease.
(Purchase separately.)
1 tube
Check the machine for grease.
18
No parts required
–
Remove the shipping straps (for
machines with MyRide™ suspension
system only).
19
No parts required
–
Check the machine before delivery to
the customer (all machines).
Operator's Manual
1
Engine Owner's Manual
1
Registration card
1
Operator training material
1
20
Key
2
Deliver the machine to the customer (all
machines).
1
Removing the Machine
from a Crate
Parts needed for this procedure:
2
Rear wheels (wooden crate only)
Removing a Machine from a Metal
Crate
If you are removing the machine from a metal crate,
refer to the
Dealer/Distributor Portal
for further
information.
Removing the Machine from a
Wooden Crate
1.
Remove the screws holding the right angle
retaining plate to the crate.
g010179
Figure 1
Gasoline Machine Shown
2
