Toro Workman 2110, Руководство оператора

Страница: 31 / 44

Fuel System
Maintenance
Inspecting Fuel Lines and
Connections
Check the fuel lines and connections every 400 operating
hours or yearly, whichever occurs first. Inspect them for
deterioration, damage, or loose connections.
Replacing the Fuel Filter
Replace the fuel filter every 800 operating hours or
yearly, whichever occurs first.
1. Raise the box and support it with the prop rod.
2. Place a clean container under the fuel filter.
3. Remove the clamps securing the fuel filter to the fuel
lines (Figure 37).
Figure 37
1. Fuel filter
4. Install the replacement filter to the fuel lines with the
clamps previously removed.
Mount the filter so that the arrow points toward the
carburetor.
Electrical System
Maintenance
Replacing the Fuses
There are 3 fuses in the electrical system. They are
located beneath the bed in a box on the right hand side
of the frame (Figure 38).
Ignition System 10 amp.
Lights 10 amp.
Power Point 10 amp. (15 amp. max.)
Figure 38
1. Ignition system 3. Power point
2. Lights
Replacing the Headlights
Specification: GE Headlight #H7610
1. Set the parking brake, turn the ignition off, and
remove the key.
2. Reach beneath the dash and push the headlight out
of the hood.
3. Remove the screws attaching the wire harness to
the headlight.
4. Remove the rubber seal from around the headlight
(Figure 39). Discard the headlight.
31