Toro Workman 2110, Руководство оператора

Страница: 12 / 44

Figure 6
1. Seat bracket 2. Seat base
5
Installing the Hitch
Parts needed for this procedure:
1 Hitch
Procedure
Note:
This procedure is only needed for Model No.
07277TC.
1. Remove the 4 bolts and nuts from the inside rear
of the frame.
2. Align the hitch with the mounting holes on the
frame. Secure the hitch with the screws and nuts
(Figure 7).
Figure 7
1. Hitch
6
Installing the Cargo Box
Parts needed for this procedure:
1 Cargo box
1 Right-hand pivot bracket
1 Left-hand pivot bracket
4 Flange head screw (3/8 x 1 inch)
1 Bolt (5/16 x 3/4 inch)
1 Flange nut (5/16 inch)
Procedure
Note:
This procedure is only needed for Model
No. 07277TC.
1. Position the cargo box onto the frame. The cargo
box must lay flat and be centered.
2. Mount the left hand pivot bracket to the left rear
corner of the frame with 2 flange head screws (3/8 x
1 inch). Position the bracket as shown in Figure 8.
12