Toro Workman 2110, Руководство оператора

Страница: 10 / 44

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
Wheel assembly 4
Install the wheels (Model 07277TC
only).
2
Steering wheel 1
Install the steering wheel (Model
07277TC only).
3
Bumper 1
Install the bumper (Model 07277TC
only).
4
Seat 2 Install the seats (Model 07277TC only).
5
Hitch 1
Install the hitch (Model 07277TC only).
Cargo box 1
Right-hand pivot bracket 1
Left-hand pivot bracket 1
Flange head screw (3/8 x 1 inch) 4
Bolt (5/16 x 3/4 inch) 1
6
Flange nut (5/16 inch) 1
Install the cargo box (Model 07277TC
only).
7
No parts required
–
Activate the battery (Model 07277TC
only).
8
No parts required
–
Adjust the front wheel toe-in.
Operator’s Manual 1
Engine Operator’s Manual 1
Parts Catalog 1
Safety Video 1
Registration Card 1
Predelivery Inspection Form 1
9
Key 2
Read the Operator’s Manual and watch
the video before operating the machine.
Note:
Determine the left and right sides of the machine
from the normal operating position.
1
Installing the Wheels
Parts needed for this procedure:
4 Wheel assembly
Procedure
Note:
This procedure is only needed for Model No.
07277TC.
1. Remove the fasteners securing the wheels.
2. Remove the shipping bracket secured to the wheel
studs.
3. Mount the wheels with the previously removed
fasteners (Figure 3) and torque to 45-65 ft-lb
(61-88 N-m).
10