Toro Workman 1100, Руководство оператора, Страница: 17 / 36

before changing the gear selection and direction.
Ignition Switch
The ignition switch (Fig. 6), used to start and stop the
engine, has two positions: Off and On. Rotate the key
clockwise to the On position to allow operation. When
the vehicle is stopped, rotate the key counterclockwise
to the Off position. Remove the key from the ignition.
Hour Meter
The hour meter (Fig. 6) indicates the total number of
hours the engine is running. The hour meter starts to
function whenever the accelerator is depressed.
Oil Light
The oil light warns the operator if the engine oil level
drops below a safe level (Fig. 6). If the light comes on
and remains lit, the oil level should be checked and oil
added if necessary; see
Engine Oil .
Note: The oil light may flicker. This is normal and no
action needs to be taken.
Light Switch
Toggle the switch to activate the headlights. Push to
turn the lights on (Fig. 6).
Power Point
The power point is used to power optional electrical
accessories (Fig. 6).
Figure 6
1. Ignition switch
2. Hour meter
3. Light switch
4. Oil light
5. Power Point
Fuel Gauge
The fuel gauge (Fig. 7) shows the amount of fuel in
the tank.
Figure 7
1. Fuel gauge
Passenger Hand Holds
The passenger hand holds are located on the right side
of the dash panel and at the outside of each seat
(Fig. 8).
Figure 8
1. Passenger hand hold
2. Hip
restraint
Pre-Starting Checks
Check the following items each time you begin using
the vehicle for the day:
• Check the tire pressure.
Note: These tires are different than car tires; they
require less pressure to minimize turf compaction
and damage.
17
2
1
5
1
1
2