Toro Wheel Horse 270HE, Руководство оператора

Страница: 6 / 44

Safety
4
•
before making height adjustment unless
adjustment can be made from the operator’s
position.
14. Reduce the throttle setting during engine run-out
and, if the engine is provided with a shut-off
valve, turn the fuel off at the conclusion of
mowing.
Slope Operation
1. For operation on slopes:
•
Never mow side hills over 5
•
Never mow uphill over 10
•
Never mow downhill over 15
2. Remember there is no such thing as a “safe”
slope. Travel on grass slopes requires particular
care. To guard against overturning:
•
do not stop or start suddenly when going up
or downhill;
•
engage clutch slowly, always keep machine
in gear, especially when travelling
downhill;
•
machine speeds should be kept low on
slopes and during tight turns;
•
stay alert for bumps and hollows and other
hidden hazards;
•
never mow across the face of the slope,
unless the lawnmower is designed for this
purpose.
Maintenance and storage
1. Keep all nuts, bolts and screws tight to be sure
the equipment is in safe working condition.
2. Never store the equipment with fuel in the tank
inside a building where fumes may reach an
open flame or spark.
3. Allow the engine to cool before storing in any
enclosure.
4. To reduce the fire hazard, keep the engine,
silencer, battery compartment and petrol storage
area free of grass, leaves, or excessive grease.
5. Check the grass catcher frequently for wear or
deterioration.
6. Replace worn or damaged parts for safety.
7. If the fuel tank has to be drained, this should be
done outdoors.
8. On multi-bladed machines, take care as rotating
one blade can cause other blades to rotate.
9. When machine is to be parked, stored or left
unattended, lower the cutting means unless a
positive mechanical lock is used.
Sound Pressure Level
This unit has an equivalent continuous A-weighted
sound pressure at the operator ear of: 90 dB(A), based
on measurements of identical machines per Directive
84/538/EEC and amendments.
Sound Power Level
This unit has a sound power level of: 105 Lwa, based
on measurements of identical machines per
procedures outlined in Directive 84/538/EEC and
amendments.
Vibration Level
This unit has a maximum hand-arm vibration level of
3.0 m/s
2
and whole body vibration level of 0.3 m/s
2
,
based on measurements of identical machines per EN
1033 and EN 1032.