g261345
g261346
Figure 55
6.
Torque the drain plug to 46 to 56 N∙m (34 to 42
ft-lb).
7.
Open the hood and secure the prop rod (if
applicable).
8.
Remove the front cover assembly; refer to
Removing the Front Cover Assembly (page 32)
.
9.
Place a shallow pan or rag under the filter to
catch oil.
10.
Change the oil filter (
).
g031261
Figure 56
11.
Remove the oil-fill cap and slowly pour
approximately 80% of the specified amount of oil
in through the valve cover.
12.
Check the oil level.
13.
Slowly add additional oil to bring the level to the
upper hole on the dipstick.
14.
Replace the fill cap.
15.
Install the front cover assembly.
16.
Close the hood.
36
