Toro TX 1000 Compact Tool Carrier, Руководство оператора

Страница: 4 / 60

Safety
DANGER
There may be buried utility lines in the work
area. Digging into them may cause a shock
or an explosion.
Have the property or work area marked for
buried lines and do not dig in marked areas.
Contact your local marking service or utility
company to have the property marked (for
example, in the US, call 811 or in Australia,
call 1100 for the nationwide marking service).
General Safety
Always follow all safety instructions to avoid serious
injury or death. Using this product for purposes other
than its intended use could prove dangerous to you
and bystanders.
•
Do not carry a load with the arms raised; always
carry loads close to the ground.
•
Slopes are a major factor related to loss-of-control
and tip-over accidents, which can result in severe
injury or death. Operating the machine on any
slope or uneven terrain requires extra caution.
•
Operate the machine up and down slopes with
the heavy end of the machine uphill and the load
close to the ground. Weight distribution changes
with attachments. An empty bucket makes the
rear of the machine the heavy end, and a full
bucket makes the front of the machine the heavy
end. Most other attachments make the front of the
machine the heavy end.
•
Have the property or work area marked for buried
lines and other objects, and do not dig in marked
areas.
•
Read and understand the content of this Operator’s
Manual before starting the engine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Never allow children or untrained people to
operate the machine.
•
Keep your hands and feet away from the moving
components and attachments.
•
Do not operate the machine without the guards
and other safety protective devices in place and
working on the machine.
•
Keep bystanders and pets a safe distance away
from the machine.
•
Stop the machine, shut off the engine, and remove
the key before servicing, fueling, or unclogging
the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
, which
means Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this manual.
4