Toro TX 1000 Compact Tool Carrier, Руководство оператора

Страница: 30 / 60

Important:
Do not press on the soft inside
area of the filter.
4. Install the air-cleaner cover with the dust cap
oriented downward and secure the latches
(
Figure 41 ).
5. Close the hood.
Servicing the Engine Oil
Service Interval: Before each use or daily—Check
the engine-oil level.
After the first 50 hours—Change the engine oil
and filter.
Every 100 hours—Change the engine oil.
(Service more frequently if conditions are
extremely dusty or sandy.)
Every 200 hours—Change the oil filter. (Service
more frequently if conditions are extremely
dusty or sandy.)
Engine-Oil Specifications
Oil Type: Detergent diesel engine oil (API service
CH-4 or higher)
Crankcase Capacity: with filter 5.7 L (1.5 US gallons)
Viscosity: See the table below.
g238048
Figure 42
Checking the Engine-Oil Level
1. Park the machine on a level surface, engage the
parking brake, and lower the loader arms.
2. Shut off the engine, remove the key, and allow
the engine to cool.
3. Open the hood and secure the prop rod.
4. Clean the area around the oil dipstick and oil-fill
cap (
Figure 43 ).
g029940
Figure 43
1. Oil-fill cap 2. Oil dipstick
5. Check the oil and add additional oil as needed
(
Figure 44 ).
Important:
Do not overfill the crankcase
with oil; if the oil in the crankcase is too high
and you run the engine, you may damage the
engine.
g029301
Figure 44
Changing the Engine Oil
1. Start the engine and let it run for 5 minutes.
Note:
This warms the oil so that it drains better.
2. Park the machine on a level surface.
3. Raise the loader arms and secure with the
cylinder locks; refer to
Installing the Cylinder
Locks (page 25) .
30