
Operating the Parking Brake
Always set the parking brake when you stop the machine or
leave it unattended.
Setting the Parking Brake
1
2
G020305
Figure 14
Releasing the Parking Brake
1
2
G020306
Figure 15
Operating the Throttle
The throttle control can be moved between
Fast
and
Slow
positions (Figure 16).
Always use the fast position when turning on the mower deck
with the blade control switch (PTO).
G008946
Figure 16
Operating the Choke
Use the choke to start a cold engine as follows:
1.
Pull up on the choke knob to engage the choke before
using the ignition switch (Figure 17).
2.
Push down on the choke to disengage the choke after
the engine has started (Figure 17).
G008959
1
2
Figure 17
1.
On
2.
Off
Operating the Ignition Switch
1.
Turn the ignition key to the Start position (Figure 18).
When the engines starts, release the key.
Important:
Do not engage starter for more than 5
seconds at a time. If the engine fails to start allow
a 15 second cool-down period between attempts.
Failure to follow these instructions can burn out
the starter motor.
Note:
Additional starting cycles may be required
when starting the engine for the first time after the fuel
system has been without fuel completely.
ST
ART
RUN
ST
OP
G008947
Figure 18
2.
Turn the ignition key to stop to stop the engine.
21
Содержание TITAN ZX6020
Страница 56: ...Schematics G014723 Wire Diagram Rev B 56...
Страница 57: ...Notes 57...
Страница 58: ...Notes 58...
Страница 59: ...Notes 59...