Operating the Parking
Brake
Always set the parking brake when you stop the
machine or leave it unattended.
Setting the Parking Brake
g027638
Figure 10
Releasing the Parking Brake
g027639
Figure 11
Operating the Throttle
The throttle control can be moved between
Fast
and
Slow
positions (
).
Always use the fast position when turning on the
mower deck with the blade control switch (PTO).
g028222
Figure 12
Operating the Choke
Use the choke to start a cold engine as follows:
1.
Pull up on the choke knob to engage the choke
before using the ignition switch (
).
2.
Push down on the choke to disengage the choke
after the engine has started (
).
g008959
Figure 13
1.
On
2.
Off
Operating the Ignition
Switch
1.
Turn the ignition key to the Start position (
). When the engines starts, release the key.
Important:
Do not engage starter for more
than 5 seconds at a time. If the engine fails
to start allow a 15 second cool-down period
between attempts. Failure to follow these
instructions can burn out the starter motor.
Note:
Additional starting cycles may be
required when starting the engine for the first
time after the fuel system has been without fuel
completely.
19
Содержание TITAN 74861
Страница 57: ...Schematics g028048 Wire Diagram Rev A 57...
Страница 58: ...Notes...
Страница 59: ...Notes...