![background image](http://html1.mh-extra.com/html/toro/titan-74861/titan-74861_operators-manual_1132456025.webp)
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
g027632
Figure 25
Adjusting the Motion
Control Levers
Adjusting the Height
Note:
Repeat the adjustment for the opposite control
lever.
The motion control levers can be adjusted higher or
lower for maximum operator comfort (
).
g027252
Figure 26
Adjusting the Tilt
The motion control levers can be tilted fore or aft for
maximum operator comfort.
1.
Loosen the upper bolt holding the control lever
to the control arm shaft.
2.
Loosen the lower bolt just enough to pivot the
control lever fore or aft. Tighten both bolts to
secure the control in the new position.
3.
Repeat the adjustment for the opposite control
lever.
Pushing the Machine by
Hand
Important:
Always push the machine by hand.
Never tow the machine because damage may
occur.
To Push the Machine
1.
Park the machine on a level surface and
disengage the blade control switch.
2.
Move the motion control levers outward to
neutral lock position, stop the engine, remove
the key, and wait for all moving parts to stop
before leaving the operating position. Make sure
the parking brake is
disengaged
.
3.
Do this procedure on each side of the
machine
g027642
Figure 27
To Operate the Machine
Move the bypass to the position for operating the
machine (
) to engage the wheel motors.
25
Содержание TITAN 74861
Страница 57: ...Schematics g028048 Wire Diagram Rev A 57...
Страница 58: ...Notes...
Страница 59: ...Notes...