Toro TimeCutter 74750, Руководство оператора

Страница: 20 / 48

Stopping the Machine
To stop the machine, move the motion-control levers to
the N
EUTRAL
position and outward to the P
ARK
position,
disengage the blade-control switch, ensure the throttle is at
full throttle, and turn the ignition key to off. Remove the
key from the ignition switch.
WARNING
Children or bystanders may be injured if they
move or attempt to operate the mower while it is
unattended.
Always remove the ignition key and move the
motion-control levers outward to the P
ARK
position
when leaving the machine unattended, even if just
for a few minutes.
Adjusting the Height of Cut
Note:
The transport position is the highest height-of-cut
position or cutting height 115 mm (4.5 inches) as shown in
Figure 18 .
Height of cut is controlled by the lever located to the right of
the operating position (
Figure 18 ).
Figure 18
20