Toro SprayMaster 34246, Руководство оператора

Страница: 12 / 64

Product Overview
g400998
Figure 3
1. Motion control levers 5. Nozzles
2. Engine/Spreader–Sprayer Controls 6. Spray wand
3. Hopper 7. Spray tank
4. Spread impeller 8. Fuel cap (Behind knee pad)
Controls
Motion Control Levers
The motion control levers, located on each side of the
top console, control the forward and reverse motion
of the machine.
Moving the levers forward or backward turns the wheel
on the same side forward or reverse respectively.
Wheel speed is proportional to the amount the lever
is moved.
g386917
Figure 4
1. LH Motion control lever 5. Forward
2. RH Motion control lever 6. Neutral
3. Front reference/Speed
control bar 7. Reverse
4. Front of the machine 8. Rear reference bar
Note:
If the motion control lever does not return
to the neutral position when released, contact an
Authorized Service Dealer.
Choke Control
Located in the center of the control console (black
lever) (see
Figure 5 ).
The choke is used to aid in starting a cold engine.
Moving the choke lever forward will put the choke in
the “ON” position and moving the choke lever to the
rear, to the detent, will put the choke in the “OFF”
position. Do Not run a warm engine with choke in the
“ON” position
12