Toro Spray Master, Руководство оператора

Страница: 47 / 88

1. If using a trailer, connect it to the towing vehicle
and connect the safety chains.
2. If applicable, connect the trailer brakes.
3. Lower the ramp.
4. Align the machine to the ramp and lock the
caster wheels; refer to
Caster-Lock Pedal (page
13)
5. Back the machine up the ramp ( Figure 57 ).
g312789
Figure 57
1. Back the machine up the
ramp. 2. Walk the machine forward
down the ramp.
6. Secure the machine; refer to Securing the
Machine for Transport (page 47) .
7. If your machine has material in the spreader
hopper, install the hopper cover
Securing the Machine for
Transport
WARNING
Securing the machine at any upper frame
location could cause the parking brake to not
function properly, which could cause serious
injury or death.
Only use the front tie-down locations at the
lower frame to secure the front of the machine.
Only use the rear tie-down locations at the
back of the frame to secure the back of the
machine.
Note:
Refer to the chemical-warning-product
label(s) before transporting the machine and follow
all local/state/federal requirements for transporting
chemicals.
Note:
Ensure that the spreader-hopper cover and the
spray wand are secure before transporting.
1. At the left side of the machine, ensure that the
shutoff valve for the sprayer tank is closed and
the drain plug is secure. At the right side of the
machine, ensure that the pump-shutoff valve is
closed.
2. Shut off the engine, remove the key, and engage
the parking brake(s).
3. Block the tires.
4. Use the tie-down points on the machine to
securely bind the machine to the trailer or truck
with straps, chains, cable, or ropes (
Figure 58
and Figure 59 or Figure 60 ). Refer to local
regulations for trailer and tie-down requirements.
g313488
Figure 58
46-inch and 52-inch machines shown
1. Front tie-down points
g313489
Figure 59
46-inch machine shown
1. Rear tie-down points
47